What is the minimum order quantity for custom color retainer cases?

It depends on the customization method. An unbranded in-stock color is available from 1 PC. Custom logo printing on a standard case normally starts at 100 PCS, a white case with a brand-color insert and logo starts at 100-500 PCS, a custom molded Pantone color requires 2,000 PCS, and full water-transfer printing requires 1,000 PCS.

Can I get an exact Pantone color match for my brand?

Yes, with custom molded color (Option 2). We mix the plastic resin in your exact Pantone shade so the entire case body is your brand color. This requires a minimum order of 2,000 PCS. For smaller orders, consider Option 3: white case with your brand color applied to the silicone insert and logo.

What is water-transfer printing for retainer cases?

Water-transfer printing (hydrographics) is a process where a design printed on water-soluble film is transferred onto the case surface. It allows full-coverage custom designs — patterns, gradients, textures, logos — that aren't possible with simple color molding. MOQ is 1,000 PCS and unit price is higher than other options due to the individual printing process.

Which color option is most cost-effective for a first order?

If your brand color is close to an available stock color, an unbranded case can be purchased from 1 PC for evaluation. If you need branding, standard logo printing normally starts at 100 PCS. If you need an exact molded brand color, the MOQ is 2,000 PCS; a white case with a brand-color insert and logo can provide a lower-volume alternative.

Can I see color samples before placing a bulk order?

Yes. In-stock cases can be ordered from 1 PC for evaluation, subject to current color availability and confirmed sample and shipping charges. For custom molded colors and water-transfer printing, approve a physical pre-production sample before mass production.

Custom Color Retainer Cases: 4 Ways to Match Your Dental Brand Colors

One of the most common questions we receive from dental brands is: "Can you make the retainer case in our brand color?" The answer is yes — but there are several ways to achieve this, each with different MOQs, pricing, and visual results. This guide explains the 4 options so you can choose the one that fits your budget and order quantity.

Why Brand Color Matters

When a patient receives their aligner starter kit, the retainer case is the product they see and use every day. A case that matches your brand color reinforces brand identity at every use. But not every brand needs 2,000+ custom-colored cases on their first order. That's why Uvcare offers a range of options from low-MOQ stock colors to full custom printing.

Option 1: Stock Colors (Available from 1 PC)

The fastest and most affordable option. Uvcare maintains stock in several popular colors — blue, black, pink, white, green, yellow, and purple. An unbranded in-stock case can be purchased from 1 PC for evaluation or small requirements. Custom logo printing is a separate process and normally starts at 100 PCS for standard cases.

This is ideal for:

Brands testing the market for the first time
Clinics that need a small batch quickly
Brands whose primary color is a standard shade

Pros: Available from 1 PC when the selected color is in stock, no custom color-matching process, and suitable for evaluating the case before a branded order.

Cons: Limited to available stock colors; you can't choose an exact Pantone shade.

Option 2: Custom Molded Color (MOQ 2,000 PCS)

If stock colors don't match your brand, we can custom-mix the plastic resin in your exact Pantone color. The entire case body is molded in your brand color — not painted or printed on top. The color therefore runs through the molded plastic rather than sitting on the surface as a color coat.

This is ideal for:

Established brands with a specific brand color
Orders of 2,000+ units
Products where color consistency across batches matters

Pros: Exact Pantone color match, color is part of the plastic (durable), consistent across production runs.

Cons: Higher MOQ (2,000 PCS), longer lead time (15-20 days for first run).

Option 3: White Case + Brand-Color Silicone Insert and Logo (MOQ 100-500 PCS)

A smart middle-ground option. The case body stays white (low MOQ, fast production), but the silicone insert and printed logo are produced in your brand color. The visual effect is a clean white case with a branded interior and logo — the brand color is present but as an accent rather than covering the whole case.

This is ideal for:

Brands that want a clean, premium look without high MOQ
Orders between 100-500 PCS
Brands whose logo color is their primary brand color

Pros: Lower MOQ than full custom color, premium two-tone appearance, brand color visible on interior and logo.

Cons: The case exterior is white, not fully brand-colored.

Option 4: Full Custom Water-Transfer Printing (MOQ 1,000 PCS)

For brands that need a 100% custom appearance — patterns, gradients, wood grain, carbon fiber, or any complex design — we use water-transfer printing (also called hydrographics or water-dip printing). The design is printed on a water-soluble film and transferred onto the case surface, creating a full-coverage custom finish.

This is ideal for:

Brands that want a unique, eye-catching design (not just a solid color)
Products targeting the premium gift market
Designs that include logos, patterns, or textures

Pros: Unlimited design possibilities, full-coverage custom finish, premium appearance.

Cons: Higher unit price than other options, MOQ 1,000 PCS, each piece requires individual printing (longer production time).

Comparison Table

Option	MOQ	Unit Price	Lead Time	Color Match	Best For
Stock Colors	1 PC for unbranded in-stock cases	Lowest	7-10 days	Closest available	Testing market, small batches
Custom Molded Color	2,000 PCS	Medium	15-20 days	Exact Pantone	Established brands
White + Color Insert/Logo	100-500 PCS	Low-Medium	10-14 days	Logo & insert only	Premium two-tone look
Water-Transfer Printing	1,000 PCS	Higher	20-30 days	Full custom design	Unique patterns, premium gift

How to Choose

If you're not sure which option is right for your brand, here's a simple decision guide:

Need a sample or a very small unbranded quantity? → Option 1 (in-stock case, from 1 PC)
Need exact brand color on the whole case? → Option 2 (custom molded color, 2,000+ PCS)
Want a unique pattern or design? → Option 4 (water-transfer, 1,000+ PCS)
On a budget but want brand identity? → Option 3 (white case + brand-color logo and insert)

Color is only one part of the finished appearance. Brands can also compare molded matte and glossy textures, soft-touch coating, pearl paint, metallic effects, and full-body decoration in our retainer case surface finish guide.

Talk to us about your brand color and target quantity — we'll recommend the most practical option. Contact us for color samples and OEM pricing.